Osram SubstiTUBE Value EM 16.2 865 120cm | Daylight - incl. LED Starter - Replaces 36W
The product is added to your shopping cart.
The bigger the quantity the better the price.
|Any Lamp all-in warranty||3 Years||
The Any-lamp All-in Warranty ensures that, should your product fail to work within the manufacturer’s average lifetime guidelines, we will replace your product at no expense to you. The warranty is included with the price, and covers you from 1 year up to 3 and 5 years.
Select the wattage of your conventional bulb to find the LED equivalent.
|Colour Code||865 - Daylight||
The colour code is a combination of the colour rendering index (CRI) and the colour temperature (K). The first number refers to the CRI (1 = very poor colour rendering, 9 = maximum accuracy). The second and third numbers refer to the colour temperature. For example, a light with a colour code of 830 has very good colour rendering and produces a warm white light.
|Average Lifetime (h)||30000|
|LED Starter included||Yes|
|Luminous Efficacy (Lm/W)||105||
The lumen to watt ratio indicates the the efficiency of the bulb in terms of how much light is output per watt of energy consumed. An LED bulb emits more than 100 Lm/W, while an incandescent bulb typically has an efficiency of 10 Lm/W.
|Light Output (Lumen)||1700||
Lumen (lm) is the term used to describe the total amount of visible light emitted by a light source. The higher the number of lumens, the brighter it is.
|Colour temperature (Kelvin)||6500K - Daylight||
The colour temperature refers to the colour produced by a light. It's measured in Kelvin (K) and ranges from warm white (1700K - 3000K) to daylight white (6500K). Neutral white (3100K - 5000K) is mainly used for general lighting applications.
|Colour Rendering (Ra)||80-89||
The colour rendering index (CRI) indicates how accurately colours are represented under a beam of light. The index goes from 1 to 99, with a CRI of 1 being the poorest and a CRI of 99 being the best possible. Be careful not to confuse colour rendering with colour temperature (K).
Dimmable bulbs work in combination with a dimmer switch and allow you to determine the desired light output. Dimming also provides energy saving potential because less power is required when the lamp is producing less light.
|Ballast||Conventional (EM); Mains (AC)||
Ballast is a term that designates a device to reduce the electrical current, it allows for example to power your source in 12V with a native voltage of 220V. There are two types of ballasts: ferromagnetic (or conventional) ballast and electronic ballast. The ferromagnetic ballast requires a starter made unnecessary for an electronic ballast.
|Beam Angle (degree)||160||
The beam angle indicates the spread of the light in degrees. Small beam angles are preferred for accent lighting, while larger beam angles are for general lighting purposes.
|Cap / Base||G13||
The cap/base of a bulb is the part that connects it to the socket in the fixture. E27 (Edison screw) and E24 (small Edison screw) caps/bases are among the most popular, although this depends on your location. GU10 is generally the most common cap/base for spotlights. Check which cap/base you need carefully as many other types are also available.
Conventional fluorescent tubes emit light in every direction (360°), including towards the ceiling where light is not needed. LED tubes have a beam angle of 120° so light is only directed where you need it. LED tubes are therefore rotatable by 90°, allowing you to adjust the beam of the light to match your preferences and fixtures.
|Manufacturer Name||ST8V-1.2M 16,2W/865 220-240V EMFLH1|
The LED tube Osram SubstiTUBE Value EM T8 is the ideal alternatives to replace the conventional tubes T8 with a G13 socket (stick shaped 27.5 mm in conventional magnetic control gear (CCG) fixtures. The color code is warm white - 3000K also known as color code 830. Please note this product is not rotatable. Extremely break-resistant thanks to the aluminium heatsink and polycarbonate cover, these LED tubes are suitable for operation at low temperatures and very resistance to switching loads. This LED tube is characterised by the high-quality of Osram and can easily replace your conventional tube with a wattage of 58W.
Areas of application
- General illumination within ambient temperatures from -20°C to +45°C.
- Corridors, stairways, parking garages.
- Cooling and storage rooms.
- Domestic applications.
- Supermarkets and department stores.
- Disconnect the power supply,
- Remove the old tube T8 from the fixture,
- Install the tube LED in the fixture,
- Turn on the power and start immediately to save up on energy.