Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube
Need help?
Contact our light specialists for free advice.Specifications
General Information
| SKU | 159642 | |
|---|---|---|
| EAN | 8711559813813 | |
| Manufacturer Name | TCW060 1xTL-D58W HF | |
|
i
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 7 years. |
Any Lamp all-in warranty | 1 Year |
Technical Information
|
i
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
|
Technology | Fixture Retrofit |
|---|---|---|
|
i
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
|
Replaces (Watt) | 1x58 |
|
i
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
|
Wattage | 58 |
|
i
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|
Voltage (V) | 220-240 |
|
i
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|
Dimmable | Not Dimmable |
| Suitable for | G13 | |
| Including bulb | No | |
| Maximum Wattage Rating | 1x 58W | |
| Suitable for Outdoor | Yes | |
| Length | 150cm | |
|
i
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|
Product Type Category | Retrofit Batten Waterproof |
Fixture Information
| EOC8 | 81381399 | |
|---|---|---|
| Mounting Method | Surface | |
| Fixture Connection | SI [Screw connection block] | |
| Optical Cover | PC (Polycarbonate) | |
|
i
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof. |
IP-rating | IP65 |
|
i
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof. |
Impact Protection (IK) | IK08 - 5 joules |
| Operating Temperature | -10 to +40 | |
| Colour of the Fixture | Grey | |
| Colour of material | Grey | |
|
i
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails. |
Emergency Lighting | No Emergency Unit |
|
i
A ballast can be seen as an energy regulator that switches on the lighting. Is there a starter in the fixture? Then this is a conventional ballast (EM). Fixtures with an electronic ballast (HF) don't have a starter. A LED driver can be compared to an electronic ballast and only works with LED lighting.
|
Ballast | Electronic – there is no starter |
Dimensions
|
i
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
|
Length (mm) | 1570 |
|---|---|---|
| Width (mm) | 86 | |
| Height (mm) | 90 |
Sensor Information
| Sensor | Without Sensor | |
|---|---|---|
| Type of sensor | No Sensor |
Downloads
Description Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube
Purchase Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube here online to benefit from our fast and cheap delivery! Take further advantage of top Philips-quality. Invest in the best lighting solution!
Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube
The Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube with its socket is characterized by a set of specifications. The colour temperature of Kelvin makes it possible to create a nice and pleasant atmosphere, making it the right choice for your building! The colour code, , does not only include the colour temperature, which has already been mentioned, but also the colour rendering, which is defined by the ability to make us distinguish all the colors of illuminated objects. The colour rendering of this product is and therefore excellent for the usage of this product. You can find further specifications here:
Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube specifications
- Colour temperature: Kelvin
- Colour rendering: Ra
- Socket:
- Average lifetime: hours
- Beam angle (degrees):
- Dimmable: Not Dimmable
- Wattage (Watt): 58
- Voltage (Volt): 220-240
Invest in good lighting with a long lifetime of hours and select the Philips Waterproof Batten TCW060 HF | 150cm - Suitable For 1x58W T8 Fluorescent Tube.
