Noxion LED Bulkhead Core 830 20W Grey | Replaces 2x26W
Need help?
Contact our light specialists for free advice.Specifications
| SKU | 223530 | |
|---|---|---|
| EAN | 8719157001144 | |
| Manufacturer Name | Noxion LED Bulkhead Core Wall/Ceiling 20W 3000K Grey Round Ø360mm (2x26W equivalent) | |
|
i
Our all-in warranty is fully included in the product price and covers both hidden defects and technical defects of the product that occurred before delivery. The warranty period differs per product and ranges from 1 year to a maximum of 7 years. |
Any Lamp all-in warranty | 3 Years |
| Average Lifetime (h) | 35000 |
|
i
The technology indicates the operating base of a light source. The most well-known and energy-efficient example is LED. Other techniques include Halogen, gas discharge, TL (fluorescent) and the light bulb.
|
Technology | LED Integrated |
|---|---|---|
|
i
This indicates which wattage of your old/conventional lighting is replaced by this LED product.
|
Replaces (Watt) | 2x26 |
|
i
The wattage indicates how much energy a light source consumes. With LED lighting, the wattage is considerably lower than with conventional lighting. LED lamps with a higher wattage generally also have a higher light intensity (number of lumens).
|
Wattage | 20 |
|
i
Lighting with a voltage of 220-240 Volt can be connected directly to the mains. Lighting with a different mains voltage (12 Volt and 24 Volt) requires an (electronic) transformer.
|
Voltage (V) | 220-240 |
|
i
When you dim lights, the full power does not have to be used. You therefore save extra on energy costs. Dimmable lamps can also be used to create an extra cosy atmosphere. Keep in mind that you need a LED dimmer to dim LED lights.
|
Dimmable | Not Dimmable |
|
i
|
Colour temperature (Kelvin) | 3000K - Warm White |
|
i
The colour code is a combination of colour rendering (CRI) and light colour (Kelvin). The first number indicates the colour rendering (1 = very poor colour rendering, 9 = maximum colour fastness). The second and third number contains the light colour. Example: the colour code 830 consists of good colour rendering (8) and warm white light (3000K). |
Colour Code | 830 Warm White |
|
i
Colour rendering is also known as Colour Rendering Index (CRI) and indicates the extent to which a light source reproduces colours, compared to the actual colours in daylight. Products with a good (80-89 Ra) or excellent (90-99 Ra) colour rendering show minimal deviations in the colour spectrum.
|
Colour Rendering (Ra) | 80-89 |
|
i
The number of lumens (lm) is the light output of a light source. The higher the number of lumens, the more light the light source emits. The wattage and the number of lumens are not connected to each other. An LED lamp with a low wattage can have a higher number of lumens than a conventional lamp with a high wattage.
|
Luminous Flux (Lumen) | 2075 |
|
i
The Luminous Efficacy (lm/W) indicates how efficiently a light source uses energy. We divide the number of lumens by the wattage. The higher the number, the more efficient a product is in terms of energy consumption. LED lighting has a considerably higher lumen/Watt ratio than conventional lighting.
|
Luminous Efficacy (lm/W) | 103.8 |
|
i
A beam angle indicates the angle of the light beam coming from a light source. The smaller the radiation angle in degrees (D), the narrower the beam angle.
|
Beam Angle (degree) | 120 |
| Optical Cover | Opal | |
|
i
The power factor indicates how efficiently a luminaire uses electricity. The rule is: the higher the power factor, the more efficient the power consumption. A product with a high power factor (0.85 - 0.95) is also the safest. This is because the amount of unnecessary power consumption (blind current) is very limited.
|
Power factor | >0.90 |
|
i
This filter allows you to refine your search by selecting specific types of light sources. Choose from options such as LED bulbs, LED tubes, or LED spots to find the perfect lighting solution for your needs.
|
Product Type Category | LED Bulkhead |
| Type of Fixture | Professional | |
|---|---|---|
| Mounting Method | Surface | |
| Suitable for Outdoor | Yes | |
|
i
The IP value indicates the degree of protection against the ingress of moisture and dust. The 1st digit (0 = not protected until 6 = completely dustproof) indicates the protection against dust. The 2nd digit (0 = not protected until 8 = protected against immersion) indicates the protection against water. Products with an IP44 rating are splashproof and products with an IP65 rating or higher are (completely) dustproof and waterproof. |
IP-rating | IP66 |
|
i
The impact protection value (IK) stands for impact resistance and protection against vandalism. This is expressed in combination with 2 digits (IK00 - IK10). Products with IK00 are not protected against resistance. Products with IK10 offer resistance to shocks of 20 Joule and are also vandal-proof. |
Impact Protection (IK) | IK08 - 5 joules |
| Operating Temperature | -25 to +45 | |
| Colour of the Fixture | Grey | |
| Housing | Plastic | |
| Colour of material | Grey | |
|
i
Lighting with a built-in emergency lighting unit (battery) continues to burn for a certain time if the power fails. |
Emergency Lighting | No Emergency Unit |
|
i
It may happen that the length of this product differs from your old lighting fixture. As a result, the product does not fit in your current fixture or in the relevant place.
|
Length (mm) | 360 |
|---|---|---|
| Width (mm) | 360 | |
| Height (mm) | 93.5 |
| Type of sensor | No Sensor |
|---|
Description Noxion LED Bulkhead Core 830 20W Grey | Replaces 2x26W
Advantages :
- Up to 70% energy savings
- Average lifetime : 35,000 hours
- Energy efficiency class : A ++
- No loss of brightness
- IP66 - Suitable for indoor and outdoor lighting
- IK 08 - Shocks and impacts resistant
- Color temperature: warm white
- Without flicker
- No maintenance
- 3 years warranty
Up to 70% energy savings
LED technology integrated to the luminaire allows energy savings of up to 70% compared to traditional fixtures. For example, a conventional 2x26 watts fluorescent fixture consumes 72 watts, plus 8 watts for the ballast. In total, a fluorescent fixture will consume 80 watts. This wall mounted LED product only consumes 20 watts, allowing you to save up to 70% of energy costs.
Average lifetime : 35,000 hours
This Noxion LED luminaire has an average lifetime of 35,000 hours. If we consider that your fixture will be on approximately 12 hours a day, 5 days a week, 60 hours will be used over a week. On a yearly basis, we will have reached 3120 hours of consumption (52 weeks x 60 hours). Your LED fixture can last up to 10 years.
Energy efficiency class A ++
This LED fixture has the highest energy efficiency class possible. Thanks to this, significant energy savings, emissions reduction and lowered impact on the environment are guaranteed.
No loss of brightness
Traditional lighting tends to lose its intensity after 10,000 hours (such as fluorescent tubes). This Noxion product will maintain the same intensity all along its lifetime. Indeed, high quality components are used, which make this product efficient luminosity wise : 2075 lumens for a ratio of 104 Lm/W.
IP66 - Suitable for indoor and outdoor lighting
This wall and ceiling fixture is suitable for indoor and outdoor environments. Indeed, it has the highest ingress protection rating (IP66). This means the luminaire is waterproof. The first digit corresponds to the protection against water (between 0 and 6), the second digit is for the protection against dust (between 0 and 8).
IK 08 - Shocks and impacts resistant
This product has a high protection rating (IK08), this ensures good protection against vandalism or accidental damage of the product.
Color temperature : Warm white
The warm white color temperature (3000 Kelvin) gives a warm and welcoming atmosphere. It is ideal for lighting entrances, corridors and as general lighting.
Without flicker
The LED technology of this luminaire, combined with the experience of Noxion in the industry, ensures the homogeneity and reliability of the product. Unlike fluorescent fixtures, which can cause headaches, this Noxion fixture is subjected to a safety testing to ensure there is no flicker. Indeed, fluorescent tubes for example, flicker about 50 times per second. Even if you do not see these flickers, your brain detects them. Flicker-free LED lighting enhances productivity and concentration.
No maintenance
Conventional lighting such as fluorescent can be expensive over the short term as they involve the frequent replacement of some components. This luminaire does not need any maintenance.
3 years warranty
The experience of Noxion in the lighting sector and the judicious choice of high quality components allow us to offer 3 years warranty on this product.
To see all Noxion wall mounted fixture, click here.
